{short description of image}

The Pit Kit set-up is quick and easy, just follow these instructions:

1. Drive the stake about half way into the ground using a wooden mallet or place a block of wood on the stake and use a hammer or rock. Never hit the stake directly with a hard object or it will ruin the stake.
2. Insert the swing arm brace into the stake.
3. Slide the swing arm through the two eyelets on the swing arm brace.
4. Slide the chain adjusting hook onto the end of the swing arm and tighten the thumb screw hand tight. 5. Hang the adjusting chain on the adjusting chain hook.
6. Hang the S hook on the end of the adjusting chain.
7. Snap the three attached grill harness clips onto the grill, space them evenly. You can hang the harness from the S hook.

Start your fire and your are now ready to cook anything from hotdogs to lobster tail.